River H&J
LKHY
River H&J PP Carpet Tiles are designed for commercial flooring projects where buyers need a practical combination of polypropylene fiber, level loop construction and a structured bitumen backing.
The product uses PP fiber, 1/10" gauge, 3 ± 0.5 mm pile height and Fine Bitumen backing, with a standard 50 × 50 cm tile format.
For B2B buyers, the value of a carpet tile is not only determined by its appearance. Project teams also need to consider how the material will be specified, ordered, transported, installed and maintained after handover. The modular format of River H&J allows the flooring to be handled as individual units, which can make quantity planning and localized replacement more straightforward.
| Specification | River H&J |
|---|---|
| Product Type | PP Carpet Tiles |
| Fiber | PP / Polypropylene |
| Construction | Level Loop |
| Gauge | 1/10" |
| Backing | Fine Bitumen |
| Pile Height | 3 ± 0.5 mm |
| Tile Size | 50 × 50 cm |
| Format | Square Carpet Tile |
| Main Application | Commercial & Project Flooring |
Note: Final technical specifications, available colors, packing details and project requirements should be confirmed with LKHY before bulk production.
Polypropylene is a commonly used synthetic fiber in carpet products where project buyers are looking for a practical balance between material cost and everyday flooring requirements.
For large commercial projects, the choice of fiber should not be made from the fiber name alone. Buyers should consider the expected foot traffic, cleaning conditions, design requirements, installation method and project budget together.
River H&J uses PP fiber with a level loop construction, creating a relatively structured carpet surface suitable for commercial interiors.
This makes it worth considering for projects where the flooring needs to meet practical specifications without automatically moving to a higher-cost fiber such as nylon.
River H&J uses a level loop construction with a 1/10" gauge and approximately 3 mm pile height.
Unlike cut-pile carpet, the surface is formed from loops rather than cut yarn ends. For project buyers, this construction provides a straightforward specification that is relatively easy to communicate in a commercial flooring schedule.
The 3 ± 0.5 mm pile height also gives project teams a clear reference when comparing different carpet tile products.
When several carpet specifications are being considered for the same project, buyers can compare:
Fiber type
Construction
Gauge
Pile height
Backing
Tile dimensions
Traffic conditions
Cleaning requirements
Installation method
Target project budget
This type of comparison is generally more useful than selecting carpet only from product photography.
The backing is an important part of a carpet tile specification because it influences the structure and handling characteristics of the finished tile.
River H&J uses Fine Bitumen backing.
For project buyers, the backing should be evaluated together with the installation method and subfloor conditions rather than considered as an isolated selling point.
Before placing a bulk order, contractors and purchasing teams should confirm:
Backing specification
Tile dimensions
Overall thickness
Installation requirements
Adhesive or fixing requirements
Subfloor preparation
Packaging method
Quantity per carton
Shipping conditions
These details can affect the actual installation process, particularly when a project involves a large quantity of tiles.
The standard 50 × 50 cm format is convenient for quantity planning.
Each tile covers approximately 0.25 m², so the basic quantity calculation can be made from the total floor area.
For example:
1,000 m² ÷ 0.25 m² = approximately 4,000 tiles
However, the final purchasing quantity should not be based solely on this calculation.
Project teams should also consider:
Cutting requirements
Irregular room shapes
Columns and structural elements
Installation direction
Access floor layouts
Future replacement tiles
Construction waste
Additional areas added during the project
For larger projects, it is generally useful to establish the installation layout before confirming the final order quantity.
River H&J can be considered for office projects where the floor plan contains multiple functional areas.
Typical areas may include:
Open-plan workspaces
Meeting rooms
Reception areas
Corridors
Breakout spaces
Small private offices
Circulation zones
For office contractors and facility teams, the 50 × 50 cm format can also simplify the management of individual sections of the floor during future renovation or localized replacement.
The actual product specification should still be matched with the expected traffic level and maintenance conditions of each office area.
Hotel flooring normally needs to be considered according to the specific zone rather than treating the entire property as one application.
For example, guest rooms, corridors, meeting areas and back-of-house spaces can have different traffic patterns and maintenance requirements.
River H&J may be considered for selected hotel areas where its PP level loop construction and Fine Bitumen backing meet the project's specification.
For hotel procurement teams, it is recommended to confirm:
Guestroom or public-area application
Daily traffic level
Cleaning method
Color and pattern requirements
Fire and building requirements
Installation system
Replacement planning
Required quantity and delivery schedule
Commercial buildings often include different floor zones within one project.
A single order may need to cover:
Reception → Corridors → Offices → Meeting Areas → Shared Spaces
Using a modular carpet format gives the project team more flexibility when calculating quantities and organizing installation by area.
For contractors, this can also make it easier to divide a large installation into separate work sections instead of treating the entire carpet floor as one continuous material.
Schools, training centers, universities and other institutional buildings may require large quantities of flooring materials across multiple rooms.
In these projects, purchasing decisions should take into account:
Floor area
Expected traffic
Cleaning frequency
Furniture movement
Installation schedule
Project budget
Required certifications or local regulations
River H&J can be evaluated as a PP carpet tile option when the project's technical requirements are compatible with its specification.
For B2B buyers, ordering carpet tiles is usually more complicated than simply asking for a unit price.
Before requesting a quotation, it is helpful to prepare the following information.
Provide the approximate floor area in square meters.
For example:
Project area: 3,500 m²
This allows the supplier to calculate the approximate number of tiles required.
Tell the supplier where the carpet will be installed.
For example:
Office
Hotel corridor
Meeting room
Reception
Commercial building
Education facility
Different areas may require different carpet specifications.
If the project already has an interior design scheme, provide:
Pantone reference
Existing carpet sample
Color reference
CAD/design file
Interior rendering
This can make color communication more precise than using names such as “dark grey” or “light blue” alone.
For project orders, delivery timing should be discussed before confirming production.
Buyers should provide:
Expected production date
Required delivery date
Destination port
Installation schedule
Whether partial shipment is acceptable
This is particularly important for large commercial projects where flooring installation is connected with other construction work.
A simple calculation is:
Required tiles = Floor area ÷ 0.25 m²
For a 2,000 m² project:
2,000 ÷ 0.25 = approximately 8,000 tiles
The actual order quantity may need to be higher depending on the layout.
For projects containing many corners, columns, curved areas or irregular rooms, the project team should review the installation drawings before finalizing the quantity.
It can also be useful to reserve some additional tiles for future localized replacement.
The appropriate reserve quantity depends on the project and should be agreed between the buyer, contractor and supplier rather than using one fixed percentage for every project.
Before mass production, we recommend confirming the following points with the supplier:
PP fiber
Level loop construction
1/10" gauge
3 ± 0.5 mm pile height
Fine Bitumen backing
50 × 50 cm tile size
Approved color
Pattern direction
Surface texture
Color consistency requirements
Installation method
Floor preparation
Tile orientation
Layout direction
Edge and corner treatment
Total quantity
Packing configuration
Production schedule
Shipping method
Destination port
Delivery schedule
Depending on the project, buyers may also need to confirm applicable test reports, certificates or technical documents before approving the material.
For large commercial projects, the choice between carpet tiles and broadloom carpet should be based on the floor plan and maintenance strategy.
| Project Consideration | PP Carpet Tiles | Broadloom Carpet |
|---|---|---|
| Modular installation | Yes | No |
| Individual section replacement | Possible | More complicated |
| Quantity planning | Tile-based | Roll-based |
| Irregular floor areas | Can require cutting | Can also require cutting |
| Installation planning | Tile layout required | Roll layout required |
| Localized maintenance | Individual tiles can be addressed | Usually requires a larger carpet section |
| Suitable for phased installation | Often practical | Project-dependent |
This does not mean carpet tiles are automatically better for every project. The appropriate flooring format depends on the building design, installation conditions, project budget and maintenance plan.
For B2B buyers, a quotation request is easier to process when the project information is complete.
You can send the supplier:
Product: River H&J PP Carpet Tiles
Size: 50 × 50 cm
Fiber: PP
Construction: Level Loop
Gauge: 1/10"
Pile Height: 3 ± 0.5 mm
Backing: Fine Bitumen
Project Area: XXX m²
Color: XXX
Destination: XXX
Required Delivery Date: XXX
For custom projects, buyers can additionally provide drawings, color references or physical samples.
This allows the manufacturer to evaluate the project requirements before preparing the quotation.
For distributors, contractors and project purchasing companies, buying directly from a manufacturer can make technical communication more straightforward.
Instead of communicating through several intermediaries, buyers can discuss product specifications, color requirements, samples, production quantities and project schedules directly with the production side.
LKHY manufactures carpet tiles in China and offers different constructions and backing options for commercial flooring applications. Its current product range includes PP-Bitumen, PP-PVC and PP-Ecological carpet tile configurations.
For project orders, the final product should always be confirmed against the approved sample and technical specification before bulk production.
River H&J may be relevant to:
Commercial flooring contractors
Hotel procurement teams
Office renovation contractors
Architectural and interior design companies
Real estate project developers
Flooring distributors
Carpet wholesalers
Building material importers
Facility management companies
General contractors
Project purchasing companies
The product can be evaluated for both new-build and renovation projects where the project specification calls for PP carpet tiles in a 50 × 50 cm format.
River H&J is a commercial carpet tile using polypropylene (PP) fiber, level loop construction, Fine Bitumen backing and a 50 × 50 cm square format.
The standard tile size is 50 × 50 cm.
Each tile covers approximately 0.25 m².
The product uses PP, or polypropylene fiber.
River H&J uses a level loop construction with a 1/10" gauge.
The specified pile height is 3 ± 0.5 mm.
The standard specification uses Fine Bitumen backing.
They can be considered for office projects when the product specification matches the project's traffic, maintenance, installation and regulatory requirements.
It can be evaluated for selected hotel areas. The final suitability should be determined according to the traffic level, cleaning conditions, design requirements and project specifications.
Since one 50 × 50 cm tile covers approximately 0.25 m², 1,000 m² requires approximately 4,000 tiles before allowing for cutting, installation waste and spare tiles.
Samples can be requested for project evaluation. Buyers should confirm available sample colors, shipping arrangements and any applicable sample costs with LKHY before ordering.
Project color requirements can be discussed with the manufacturer. Buyers can provide a color reference, design file or physical sample for evaluation.
LKHY provides carpet tile products for commercial and project applications. For a large order, buyers can provide the project area, specification, color requirements, destination and delivery schedule so the product configuration can be reviewed before quotation.
For a more accurate quotation, provide the floor area, product specification, required color, destination, expected delivery date and project application. Drawings or samples can also be provided when customization or color matching is required.
For commercial projects, keeping some additional tiles can be considered because individual damaged or heavily soiled sections may need replacement later. The appropriate quantity depends on the project size, traffic conditions and maintenance plan.
Not necessarily. Fiber type alone does not determine whether a carpet is suitable for a particular traffic level. Buyers should evaluate the complete construction, backing, installation conditions, maintenance requirements and applicable project specifications.
